Sears 113.244501 Saw User Manual

Posted : admin On 10/4/2021

Attention! The text in this document has been recognized automatically. To view the original document, you can use the 'Original mode'.

Advertising

Offer valid through 12/7/19 11:59 PM CST. Discount reflected in price shown. Valid on items marked sold by Sears and/or Marketplace except where indicated. While quantities last. No rainchecks. No in-store price matching allowed.

INSTALLING THE BLADE

WARN!NG:Turn

Off saw,

remove

swilch

Craftsman 113.244510 Manual

key

and unplug saw

before

removing or installing

blade.

1 Loosen the upper slide lock knob and position the

guide assembly about half way between the table
and the frame Tighten the lock knob

2 Open thè front cover of the saw by pulling forward

on the finger hold located on the left side of the
band saw

3

Remove the blade guard by loosening the screw

located on the side of the guard using a #2 phiilips
screwdriver Slide the guard up and pull forward to

remove it from the blade guide support

4 Unscrew the upper blade guides using a 1/8 inch

hex 'I' wrench and separate them about 1/8 inch
Repeal this step for the lower blade guides

NOTE; There is a patch on the blade guide(s)
threads that makes them difficult to turn This is nec­
essary to prevent rotation of the guides during opera­

tion of the saw

Loosen the setscrew which locks the upper blade
guide support (tocated on the left side of the sup­
port behind the bearing) Push the support all the
way back Loosen the setscrew holding the upper
back-up bearing (Located on the right side of the

upper slide). Push the bearing all the way back
With the guide

support and back-up

bearing

pushed back, slightly tighten both set screws

Blade

Guide

Upper Slide

Saw

Upper Blade

Guide Support

Set Screw

Bearing

BLADE GUABO
HEMOVED FOB

CLARITY

Craftsman Model 113.244510 Bandsaw

Upper

Back-Up Bearing

Set Screw

Blade

Guide Support

Loosen the setscrew which locks the lower blade
guide support (accessed through notch in frame
located below table) Push the support all the way
back Loosen the setscrew holding the lower back­
up bearing Push the bearing all the way back
With

the

Sears 113.244501 Saw User Manual 2017

guide

support

and

back-up

bearing

pushed back, tighten both set screws,

Advertising
Popular Brands

Sears 113.244501 Saw User Manual Download

Popular manuals