User may need to enable or allow the add-on / extension in the internet browser. NPFC HP Business Slim Smartcard Keyboard HP Recycled Series Backpack HP Slim Ultrabook Top Load Case HP Business Top Load Case HP Executive 15.6' Black Backpack HP Executive Slim 14.1' Top Load Case. The HP EliteBook 840 is a highly secure and manageable PC. Get HP HP EliteBook Folio 9470m Ultrabook RAID User Guide. Get all HP manuals! Sign up to create an account Facebook Twitter. By clicking Create Account, you agree to the Company’s. Or point us to the URL where the manual is located. Your manual failed to upload.
RAID volume setup
If your system has Intel® Smart Response Technology, please see
before setting up RAID volumes.
The following instructions assume that a supported hard drive is installed in the computer Upgrade
Bay, in the SATA-swappable bay of the docking station, or connected to the eSATA port of the
The basic RAID migration steps are as follows:
Enable RAID through the Computer Setup (BIOS).
Initiate RAID migration using Intel® Rapid Storage Technology Console.
Make sure that the computer is connected to AC power before initiating the following
procedures. The loss of power during RAID migration can result in the loss of data.
Hp Elitebook Folio 9470m Ultrabook
Enable RAID using the Computer Setup (BIOS) (f10)
The following procedures assume that you are using the hard drive image that shipped with
your computer. If a different image is installed on your computer, you must first enable RAID through
the Computer Setup (BIOS) (
), and then install the operating system and all required drivers,
including the Intel Rapid Storage Technology driver. Next, follow the steps in
. RAID volumes are created primarily between the primary hard drive and an internally-
connected secondary hard drive. RAID volumes are not allowed to be created between a primary
hard drive and an externally- connected hard drive. Creating a RAID volume between two externally-
connected hard drives is possible, although there is little benefit in doing so.
Turn on the computer, or restart it.
as soon as the computer boots.
If you do not press
at the appropriate time, you must restart the computer, and then
again to access the utility.
In the Computer Setup (BIOS), select System Configuration>Device Configurations.
Chapter 5 RAID volume setup