Ge Deep Fill Washer User Manual

Posted : admin On 10/7/2021
Operating instructions.

Repairing a GE top-loading washer? This video demonstrates the proper and safe way to disassemble a washing machine and how to access parts that may need to be tested and/or replaced. Here is a list of the most common washer problems: Washer won't spin Washer is making loud noise Washer won't agitate Washer won't drain Washer is vibrating. The Magic Chef 2.7 cu. Washer makes The Magic Chef 2.7 cu. Washer makes laundry day easy. Perfect for limited spaces including apartments and vacation homes this versatile front load unit boasts 16 total cycles including delicate heavy-duty normal active wear and sanitary Five wash/rinse cycles along with 5 spin speeds give your garments the proper.

Deep Fill
Select the Deep Fill feature for loads where extra water is needed.
Press the Deep Fill button once before starting the cycle to add an incremental amount of water to the wash load. Holding the Deep Fill
  • Meets the needs of cleaning the most heavily soiled clothes, or loads that benefit from a deeper soak. Maximize Options. GE new Designer Line has more washing combinations than any other brand within its class. It allows to customize and target your washing for.
  • Top Load Washers - Deep Fill Rinse. On top-load washers with this feature, Deep Rinse should be used when using liquid fabric softener or when a deep fill rinse is needed. When this option is selected, the washer will go into a deep rinse after the agitation cycle. Not to be confused with Deep Fill which occurs prior to the end of the agitation.
button for 3 seconds will provide the deepest fill level possible; this will increase cycle time due to the additional time it takes to fill the
To cancel the option if desired, press the Deep Fill button again.
NOTE: The Deep Fill button can also be pressed after the washer has completed filling and is in the wash phase if additional water is
desired. To stop the extra fill, press the Deep Fill button again and the water will stop.

Ge Deep Fill Washer Reset

This option begins with a brief agitation, soaks for a specified period of time, then moves through the rest of the cycle automatically.
When you use extra detergent or bleach to clean heavily soiled clothes, use the 2nd Rinse option to better remove additional residues.

Ge Deep Fill Washer Instructions

Select to provide additional spin time, increasing energy efficiency through reducing drying times.
Provides both a second rinse and an extra spin.
Set this option to provide a deep rinseor when using fabric softener. This option may change other settings (e.g. Spin may go to a higher
Your washer is equipped with Consumer Help Indicator (CHI). CHI is our way to communicate a simple remedy for some situations
that you can perform without the need to call for service. The chart below describes the helpful lights you may notice flashing on
Spin light blinkingIf an out-of-balance condition is detected by the washer, the Spin light will blink during the remaining portion
of the cycle and will stay illuminated for a short time after cycle completion. When this occurs, the washer is
taking actions to correct the out-of-balance condition and complete the cycle normally. In some cases, the
washer may not be able to balance the load and spin up to full speed. If you notice the load is more wet
than normal at the end of the cycle, redistribute the load evenly in the wash basket and run a Drain & Spin
Fill light (Water not
Check your house water supply. Did you forget to turn on one or both supply valves after installation or
period. The washer controls won’t respond/change during this time. After the 4 minutes, you can begin your
cycle again. If you try to bypass the lock-out period by unplugging the washer, the 4 minute timer will start
Lid Locked lightLid Locked light will flash if 3 cycles have been started without opening the lid. The washer will not start
another cycle until the lid is opened. Try opening, then closing the lid and starting a new cycle. If the problem

Ge Deep Fill Manual

persists, call 800.GE.CARES (800.432.2737) for service.