450 and 700 VA
Use the computer interface port for unit monitoring and control. See section 7.
The configuration button changes the unit’s sensitivity to utility voltage variations and the low
battery warning interval. See sections 5.9 and 5.10.
The configuration LED indicates the voltage sensitivity setting and the low battery warning
interval. See sections 5.9 and 5.10.
User Manual Smart-UPS™ Uninterruptible Power Supply 750/1000/1500 VA 100/120/230 Vac Rack Mount 2U. EN 990-1194E 08/2014 Smart-UPSTM Uninterruptible Power Supply 750/1000/1500 VA 100/120/230 Vac Rack-Mount 2U. 1 Introduction The APC™ by Schneider Electric Smart-UPS ™. User Manual English APC Smart-UPS® 1000/1500 VA 100/120/230 VAC 750/1000XL VA 120/230 VAC Tower. The APC Uninterruptible Power Supply (UPS) is designed to prevent blackouts, brownouts, sags. The Smart-UPS switches to battery operation automatically if.
The site wiring fault indicator comes on when the unit is connected to an improperly wired AC
power outlet. See section 4.8.
The output circuit breakers (2200 VA and 3000 VA models only) trip when the connected loads
exceed the protected receptacle’s capacity. The center plunger of the circuit breakers extend when
The input circuit breaker trips when loads exceed the unit’s capacity. The center plunger of the circuit
breaker extends when tripped. The paddle handle on 3000 VA model input circuit breaker shows “off ”
Use the transient voltage surge suppression (TVSS) ground connector for the ground leads of
telephone or network line protectors. See section 4.9.
The input power connector is a power cord with a NEMA 5-15P connector for 450 through 1400
VA models. See the table below for input power connectors on 2200 VA and 3000 VA models.
The output power receptacles are NEMA 5-15R type. Optional output power receptacle kits are
available from the factory for the 2200 VA and 3000 VA models. See your dealer or call the
number at the front of this manual for more information.
Optional accessories can be installed in the accessory slot. See section 4.4 and section 7.
Use the battery pack connector to connect the optional external battery pack (3000 VA model